[CA] [CA11] T120 Wind Transducer lost signal

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum sthomason,

The most common cause for the reported problem is low battery level(s) within the components. It is recommended that the hull transmitted be permitted to charge overnight and that the system then be tested again. Should the problem persist and should more than one display is located onboard the vessel, then it would be recommended that display which is closest to the T120 be configured as the master. Should the problem persist thereafter, then the please indicate whether the vessel features structures which have been constructed from carbon fiber and/or sails which have fabricated from kevlar.