Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] RS150 STNG connection failure
06-06-18, 10:32 AM (This post was last modified: 06-06-18 10:32 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] RS150 STNG connection failure
Welcome to the Raymarine Forum Edward,

Please attach a diagram of your system's SeaTalkng / NMEA 2000 network, listing the make/mode each device which has been connected as a spur to the SeaTalkng / NMEA 2000 as well those which have been interfaced to the yellow socket of the SeaTalk to SeaTalkng Converter. Please additionally specify how your backbone has been powered and where its power insertion spur is located (i.e. need to know which devices are installed on each side of the power insertion spur). If the system features an autopilot ACU or course computer, please be certain to specify its make/model.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] RS150 STNG connection failure - Chuck - Raymarine - Moderator - 06-06-18 10:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us