The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New Axiom 9" with ST6001 Autopilot
06-09-18, 08:48 PM (This post was last modified: 06-12-18 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] New Axiom 9" with ST6001 Autopilot
Hello, I just installed a new Axiom 9" with real view, it works great! However I can't seem to get my original autopilot to work. I purchased the converter to allow my Axiom unit to talk to my original ST6001 autopilot through seatalk. for some reason I can't get it to work properly and I've tried everything.

I can't get the autopilot to calibrate and read direction properly, I tested the fluxgate compass, it was within spec after testing but not perfect so I ordered and installed a new one, that didn't help, it still wouldn't calibrate and read proper direction. So then I figured it must be the computer so I purchased a tested S1 autopilot computer and replaced my original, that didn't fix it. The crazy thing is that it worked when I had my original C120 in place before I installed the new Axiom unit.

Any ideas? Is there a way for me to ensure the Axiom unit is properly communicating with the ST6001 autopilot? Would it calibrate properly if it wasn't? I'm getting tired of doing circles.... Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] New Axiom 9" with ST6001 Autopilot - Jefreg - 06-09-18 08:48 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)