Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] C80 import problems
06-19-18, 03:52 PM
Post: #2
RE: [CA11] C80 import problems
Polymela,

First, let me state that the software which is currently installed within your MFD is several revisions behind the final C-Series Classic MFD software update (v5.16). It is recommended that its software be updated accordingly. Regarding CF memory cards used for software update or for data transfer / archival, the days of readily available compatible CF memory cards has long since passed. As indicated within the FAQ found here, should one not possess a CF memory card which has been previously proven to be compatible used in updating the software in one's product, that a compatible CF memory card, populated with the software update files for one's A-Series Classic MFD, C-Series Classic MFD, E-Series Classic MFD, RC400, RC435/RC435i, be ordered from Radar Marine. Doing so would also eliminate the risk of purchasing a CF memory card which is incompatible with the product for performing software updates. After updating the software in one's MFD, the software update files may be deleted from the CF memory card, then permitting it to be used for purposes such as data transfer / archival. As Raymarine's Product Repair Center can no longer service C-Series Classic MFDs, all of the above would only be recommended if the MFD's memory card reader was determined to be operational.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] C80 import problems - Polymela - 06-17-18, 06:08 PM
RE: [CA11] C80 import problems - Chuck - Raymarine - Moderator - 06-19-18 03:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us