[CA11] Axiom 9 will not display both fuel tanks

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom 9 will not display both fuel tanks

06-18-18, 10:46 AM (This post was last modified: 06-19-18 02:14 PM by Chuck - Raymarine - Moderator.)

Post: #1

Mike sandor Offline

Junior Member

Posts: 4
Joined: Dec 2017
Reputation: 0

[CA11] Axiom 9 will not display both fuel tanks

I reciently completed the install of a Axiom 9 and Quantum 2 radar. The final step was to install a Gateway module to transfer data from the Mercruiser Vessel view to the Axiom unit. Most of the data transfers correctly other than the duel fuel tanks. In discussions with Mercruiser, they stated that if the data is being displayed correctly on the Vessel View unit, it must be that the Axiom unit is not set up properly for two fuel tanks. Have have checked that the Axium is set for two fuel tanks but still only recieves data for one. Mercruiser suggested that PGN is not configured in the Axiom. Question is, where and how do I access the file to edit?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom 9 will not display both fuel tanks - Mike sandor - 06-18-18 10:46 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 06-19-18, 02:14 PM

RE: [CA11] Axiom 9 will not display both fuel tanks - jwasko - 06-19-18, 05:29 PM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 06-20-18, 09:04 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - argus - 07-05-18, 10:30 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 07-05-18, 11:41 AM

RE: [CA11] Axiom 9 will not display both fuel tanks - brian Fitz - 09-19-18, 03:16 PM

RE: [CA11] Axiom 9 will not display both fuel tanks - Chuck - Raymarine - Moderator - 09-19-18, 04:15 PM

User(s) browsing this thread: 1 Guest(s)