Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] New Equipment information
07-08-18, 07:52 PM
Post: #4
RE: [TG11] New Equipment information
Hello lwilson,

Generally speaking, a Chirp sounder will give clearer results than non-chirp, but there are some targets which reflect (show up) better at some frequencies than others. The P66 is non-chirp, 50/200kHz. It will give a bit better performance in deeper water than the RV transducers (higher power) but at the expense of resolution and clarity (non-chirp.) The only 83kHz (non-chirp) transducers that we're compatible with are those built into Minn-Kota trolling motors, but the Axiom Pro's 1kW port can ping Airmar Chirp transducers at the Medium band which is approximately 80-130kHz (transducer-dependent.) Personally, I would always recommend chirp over non-chirp, but there's no chirp depth-speed-temperature transducer.

If P66 is the transducer you want, you can indeed connect E66054 to Axiom Pro via A80496.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] New Equipment information - Tom - Raymarine - Moderator - 07-08-18 07:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)