Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Axiom pro (internal cp470) chirp kHz sonar range
06-25-18, 02:01 PM (This post was last modified: 06-26-18 03:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Axiom pro (internal cp470) chirp kHz sonar range
Hi All

Can you please advise. We fish out of the Gold Coast Australia sport fish, deep drop and hit the shallow reefs (24 to 50 fathoms) so we are fishing water from 100m to 1100m in depth.
I am looking for good all rounder and believe the Axiom Pro would best suit my needs, my boat is only 7m and plate alloy so the below transducers have been recommended;
RV-100 transducer(in shore only)
SS175L transducer
SS175H-W transducer
Y cables to suit

After looking for the Sonar specs i couldn’t find full details on the “in built cp470”. The install manual states the unit to have 1x 50 kHz low and 1x 200kHZ high?

However the CP470 CHIRP Sonar specs are Dual CHIRP from 25 to 250kHz

Is this right or does the axiom pro have Dual CHIRP from 25 to 250kHz capacity?

Sorry to bombard you could you also please confirm the next question.

I believe the axiom pro will only ping one transducer then the next at 1kw so low kHZ returns in deep water may be slow? Is this the same for the cp470? ( I know the cp570 has full separation and can ping 2 transducers at the same time at full power)

Can you please confirm and advise

Thanks heaps Michael
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[TG11] Axiom pro (internal cp470) chirp kHz sonar range - Mickfish - 06-25-18 02:01 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us