The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Interfacing ST2000+ and i60
06-26-18, 07:43 PM (This post was last modified: 06-27-18 07:30 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG] Interfacing ST2000+ and i60
Hi there... Need some help on this one please. Trying to interface the ST2000+ with the i60. All I have are the cables that came with the i60 and the D179 Seatalk male round to bare ends that I ordered and ebay that I'm now questioning if it was the right purchase.

I believe the i60 comes with an Seatalk ng to Seatalk adapter. That one has a flat plug at the Seatalk end. How can I interface this Seatalk flat plug with the D179 male round, which I need to use as my tiller is 8 feet away? Can I cut off the male round and flat plug fittings and heat shrink the yellow wires together and then take the +12 V and 0 V (Red and Grey) from the adapter cable to my busbar? Or is there a better way to do this? I want to try and avoid ordering the converter kit as it's a little expensive for this one application.

Thanks! Mark
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] Interfacing ST2000+ and i60 - markyfff - 06-26-18 07:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)