Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Fuel Gauge
06-30-18, 12:07 AM (This post was last modified: 07-02-18 10:35 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Fuel Gauge
What do you need to have the fuel gauge work on the DATA/ENGINE screen.
I have fuel flow and reset the level when I add gas but I never have an needle on the gauge, Is there a way it can be done without a tank sending unit??
Say a 50 gallon tank and 25 had been burned should be a half tank. Should be possible for those of us with irregular shape tank shapped tanks to have the unit do the math and show a needle at half a tank without a sensor in the tank.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] Fuel Gauge - Hickory Legend - 06-30-18 12:07 AM
RE: [CA11] Fuel Gauge - Hickory Legend - 07-03-18, 12:12 PM
RE: [CA11] Fuel Gauge - Hickory Legend - 07-09-18, 10:26 PM
RE: [CA11] Fuel Gauge - Hickory Legend - 07-10-18, 09:58 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us