Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axiom 9RV or 7DV to Airmar B744v
07-24-18, 02:14 PM (This post was last modified: 07-24-18 02:15 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Axiom 9RV or 7DV to Airmar B744v
Welcome to the Raymarine Forum rich59,

Please excuse the delay in this response. Please click here to view the FAQ addressing adapting transducers which are designed for third party fishfinders for use with Raymarine fishfinding products and splicing fishfinder transducer cables. While Airmar, Inc. offered Mix and Match 600W Fishfinder Transducers, you may want contact Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) to determine whether the variant of the B744V transducer owned is the Mix and Match version of the B744V transducer, and if so, whether they have had any success in adapting it to be used with an Axiom RV MFD (ask for specifics). If not, then it would be recommended that the currently installed B744V transducer be replaced with the A66091 version of the B744V transducer (CP370 compatible). While only 50kHz/200kHz transducers designed to be directly mated to a CP370/CP300/DSM30/DSM300 may be adapted to be mated to the 1kW transducer socket of an Axiom Pro RVX MFD, transducers which were also designed to be mated to an ax7/cx7/e7D/eSx7 MFD may also be adapted to be mated to an Axiom MFD. Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Axiom 9RV or 7DV to Airmar B744v - Chuck - Raymarine - Moderator - 07-24-18 02:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us