The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E125 MFD vessel position not advancing
08-03-18, 06:01 AM (This post was last modified: 08-03-18 10:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E125 MFD vessel position not advancing
I have a E125 E70023 MFD. The MFD will intermittently stop advancing the vessel position on the display. The Lat/Long position advances correctly and all other features are working and there is no alarm. The vessel on the display will even rotate if I change course but the position is incorrect. I am attaching an image showing the the vessel in the wrong position on the MDF the Lat/Long is correct and also showing an alternate plotter showing the correct vessel position for comparison.

CS
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E125 MFD vessel position not advancing - Delfina - 08-03-18 06:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)