Data from EV-1
|
07-13-16, 03:12 PM
Post: #3
|
|||
|
|||
RE: Data from EV-1
(04-20-16 01:23 PM)Steve - Raymarine - Moderator Wrote: The EV-1, produces heading data, virtual rudder reference data, only when underway, and tilt (aka heal angle).Steve? What does "only when underway" in your sentence apply to? And how does the EV-1 know that the vessel is underway? Second, 87180-2-EN_Evolution_EV-1_and_ACU_Installation_instructions.pdf only mention transmitting 127245 "Rudder angle" and 127250 "Vessel heading". There is no mention of tilt / heal (i.e. heel), which I believe would be 127257 "Attitude" which supplies yaw, pitch, and roll. Related, that same pdf says that the EV-1 also receives 127250 "Vessel heading" - how is this used? In my application I have two devices transmitting 127250 - the EV-1 and an Airmar WS-200WX, but only the EV-1 is showing up in my a78 as a source for "Heading". The a78 is receiving wind data from the Airmar (and the EV-1 can receive wind data PGNs), but apparently not heading from the Airmar. And a laptop on this network is receiving 127250 from both devices. Is there some particular filtering that the a78 is doing to discard the Airmar's 127250 PGN? Lulu: 36' Little Harbor WhisperJet Raymarine: Axiom 12 RV, RV200, Axiom 12 Pro, Evo 1/ACU 150/P70RS, Quantum Q24C, HS5 ---previous---- Refugio: 44' trawler Raymarine: ACU-400, EV-1, P70R, a78, M81105 RFU, ST60 RAI, E22158 ST-STNG NMEA 2000: Garmin 740S & GMR18 HD, Airmar WS-200WX, Actisense NGT-1 |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Data from EV-1 - marchem - 04-20-16, 12:54 PM
RE: Data from EV-1 - Steve - Raymarine - Moderator - 04-20-16, 01:23 PM
RE: Data from EV-1 - Keith Pleas - 07-13-16 03:12 PM
RE: Data from EV-1 - Chuck - Raymarine - Moderator - 07-18-16, 10:27 AM
RE: Data from EV-1 - Keith Pleas - 07-18-16, 12:10 PM
RE: Data from EV-1 - Chuck - Raymarine - Moderator - 07-18-16, 03:55 PM
RE: Data from EV-1 - Keith Pleas - 07-19-16, 11:34 AM
RE: Data from EV-1 - Chuck - Raymarine - Moderator - 07-19-16, 01:09 PM
|
User(s) browsing this thread: 1 Guest(s)