Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ntermittent lock ups on Axiom Pro 9
08-14-18, 03:43 PM
Post: #2
RE: [CA11] ntermittent lock ups on Axiom Pro 9
Welcome to the Raymarine Forum Delsey,

It is recommended that a Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be performed to each display and that any logs (HOME->SETTINGS->NETWORK->DIAGNOSTICS->ERASE LOGS). After configuring the MFDs, be certain to specify via the system's Data Sources feature which source of GPS data will be utilized by the system. Please verify that the system includes only one instance of any one type of chart card (ex. while it is alright to have a LightHouse and Navionics chart card within the system, there should not be two Navionics chart cards within the system). Should the problem persist thereafter, then on the first occurrence, please execute the following commands on the system's Data Master MFD:
- HOME->SETTINGS->NETWORK->DIAGNOSTICS->PRODUCT INFO->SAVE DATA) ... save product info into a file titled Raymarine/My Data/Diagnostics_.json on the microSD memory card
- HOME->SETTINGS->NETWORK->DIAGNOSTICS->PRODUCT INFO->SAVE DATA) ... save product info into a file titled Crash_xxx_yyy.log.log (there may be more than one); where [censored] is the product ID / serial no. and yyy is the date.
- HOME->SETTINGS->NETWORK->DIAGNOSTICS->PRODUCT INFO->SAVE DATA) ... save product info into a file titled logs/Summary_xxx_yyy.log; where [censored] is the product ID / serial no. and yyy is the date.

Please indicate the actions which were being attempted when the problem occurred. Please additionally specify whether the system features a USB remote card reader and whether it was in use.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ntermittent lock ups on Axiom Pro 9 - Chuck - Raymarine - Moderator - 08-14-18 03:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)