Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] c95 to existing ST1 daisy chain
09-24-18, 12:31 PM
Post: #6
RE: [CA11] c95 to existing ST1 daisy chain
HS,

Q1. MFD Port 1, 0183 I/O to course computer
A1. Please refer to the updated information within my initial post.

Q2A. MFD port 2, 0183 I/O to AIS data from VHF (although I'm thinking any of any TX to VHF???)
A2A. The MFD's NMEA 0183 Port 2 is a receive-only port.

Q2B. Can easily see other option of powered ng/n2k network here too
Q2B. Should bidirectional communications be required with the VHF radio/AIS receiver, then it would be advised these products be interfaced as spurs to the aforementioned SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] c95 to existing ST1 daisy chain - Chuck - Raymarine - Moderator - 09-24-18 12:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)