Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Garmin GPSMAP instruments to C70 Classic via NMEA0183
09-19-18, 08:27 AM
Post: #2
RE: [CA11] Garmin GPSMAP instruments to C70 Classic via NMEA0183
Welcome to the Raymarine Forum networklabs,

While it would certainly be possible to achieve the end which you are seeking (assuming that unspecified model of Garmin GPSMap product (you will need to provide the specifics) supports such bridging), the best installation practice would be add a NMEA 2000 to NMEA 0183 data bridging device (ex. Actisense NGW-1, etc.) to the system's NMEA 0183 backbone and then interface the NMEA 0183 data bridging device's NMEA 0183 OUT/TX+ and OUT/TX- leads/terminals to the NMEA 0183 IN+ (white) and NMEA 0183 IN- (green) of the MFD's NMEA 0183 Cable respectively. The recommended solution would support supplying instrument data to the C70 MFD, irrespective of whether the Garmin GPSMap product is switched ON or OFF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Garmin GPSMAP instruments to C70 Classic via NMEA0183 - Chuck - Raymarine - Moderator - 09-19-18 08:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)