The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] GPS from Horizon GX2200B to C120
09-19-18, 02:00 PM (This post was last modified: 09-20-18 11:56 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] GPS from Horizon GX2200B to C120
Hi,
This has probably been addressed before. I have a used C120 Legacy chartplotter I acquired with just a power cable. It is powered up. I purchased and installed a Horizon GX2200B AIS receiver so I could get GPS to the C120. IS there a specific cable I can buy that plugs into the NMEA port on the C120 to wire into the NMEA IN/OUT wires from the radio. If so, would I hook NEMA out on the C120 to OUT from the radio or IN ?
Thank you,
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] GPS from Horizon GX2200B to C120 - kustomtool - 09-19-18 02:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)