Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Which Camera to Install
11-28-18, 10:08 AM
Post: #2
RE: [CA11] Which Camera to Install
Welcome to the Raymarine Forum argus,

The CAM210 may be mounted to the topside or underside of a horizontal surface a well as to vertical or sloped surfaces. The CAM210 would typically be used as a deck camera, forward or aft looking camera, or engine room camera. The CAM210 features IR LEDs to permit operation in dark lighting conditions. In contrast, the CAM220 would typically be mounted to a vertical bulkhead or to the underside of a horizontal surface to support daylight operation and/or operation within a illuminated space where the owner is seeking a low profile camera. Most seeking use of the LightHouse 3 ClearCruise Augmented Reality feature will opt for the CAM210.

The M232 is required for those seeking to use the ClearCruise Thermal Camera feature. Thermal cameras bring additional situational awareness (i.e. the ability to see objects which may not be visible to a visible light camera under conditions of low visibility) to vessel operation and would supplement ClearCruise Augmented Reality via the CAM210.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Which Camera to Install - argus - 11-28-18, 08:17 AM
RE: [CA11] Which Camera to Install - Chuck - Raymarine - Moderator - 11-28-18 10:08 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)