Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] i60 Wind System Anemometer Failure
11-28-18, 04:02 PM (This post was last modified: 11-30-18 12:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] i60 Wind System Anemometer Failure
Hello -

I bought an i60 wind sensor and display (mechanical) in on 3/17/17.

Over the last 3 months it has intermittently displayed bad wind speed readings. Right now it's varying between 0 and 99.9 knots in a steady 15 knot breeze.

Now it never works (i.e. it always shows random numbers).

The wind direction works fine.

I have reconnected it at the mast head and at the display to rule out a flaky connection. All contacts looks shiny and new.

The wire to the masthead was new installed with the masthead unit.

I am currently in Easter Island and will next travel to the Marquesas, so clearly a warranty repair is very complicated for me.

I have an oscilloscope I can use to debug, if a technician can give me directions.

Regards
Jordan
SY Quasar
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] i60 Wind System Anemometer Failure - JYLC48 - 11-28-18 04:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us