Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Network with E7, Axiom and HS5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Network with E7, Axiom and HS5
01-10-19, 08:54 AM
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Network with E7, Axiom and HS5
Peter,

Q. As I have too long distance between the NMEA/Stng adapter A06045 for the Axiom to the STng backbone my question is if I can connect a Blue backbone cable on the STng converter no.2 (where the blue termination plug is fitted now) and run the cable close to the A06045 with a T-piece and then connect the spur from the A06045 to this? Then put the plug in the empty port of the T-piece.
A. Indeed you may do as you have suggested.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Network with E7, Axiom and HS5 - Chuck - Raymarine - Moderator - 01-10-19 08:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication