Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] adding DSM300 to C80
01-09-19, 12:55 PM (This post was last modified: 01-09-19 04:03 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] adding DSM300 to C80
Welcome to the Raymarine Forum G,

It is not possible to use the currently installed depth transducer from the SmartCraft system with a DSM300. The DSM300 was designed to be interfaced to the same set of fishfinder transducers which are designed for use with the CP370.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] adding DSM300 to C80 - CaptG - 01-09-19, 10:56 AM
RE: [CA11] adding DSM300 to C80 - Chuck - Raymarine - Moderator - 01-09-19 12:55 PM
RE: [CA11] adding DSM300 to C80 - CaptG - 01-09-19, 03:49 PM
RE: [CA11] adding DSM300 to C80 - CaptG - 01-09-19, 04:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)