The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Cameras v / [CA] [CA11] e125, HS5, CAM220ip - no communications

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e125, HS5, CAM220ip - no communications
01-14-19, 10:29 AM (This post was last modified: 01-16-19 11:06 AM by Chuck - Raymarine - Moderator.)
Post: #1
jamoritz Offline
Junior Member
**
 		Posts: 4
Joined: Nov 2017
Reputation: 0
[CA11] e125, HS5, CAM220ip - no communications
I am unable to see newly installed 2 each CAM220ip on my e125. The CAM220ip cameras are connected to HS5 through CAT6 cable to A80247 adapter. The lights on the HS5 on the camera ports are not flashing. Have sonar connected to same HS5, sonar port lights are flashing and can see sonar on e125. If I connect PC to CAT6 cable, unplugging from A80247 I can see the camera.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] e125, HS5, CAM220ip - no communications - jamoritz - 01-14-19 10:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication