Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quantum 2 height
02-07-19, 05:11 PM (This post was last modified: 02-07-19 05:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Quantum 2 height
Welcome to the Raymarine Forum Mark,

Q1) How high does the radar need to be elevated on a pedestal for the beam to clear the front lip?
A1: This is calculated using the tangent formula:
tangent 10 degrees = Height / 90"
Height = tangent 10 degrees * 90"
Height = 0.1763 * 90"
Height = 15.87"

Q2) How high would it need to be if I added a 4 degree wedge/washers?
A2) This is calculated using the tangent formula:
tangent (10 degrees + 4 degrees) = Height / 90"
Height = tangent 14 degrees * 90"
Height = 0.2493 * 90"
Height = 22.44"
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Quantum 2 height - MarkB - 02-06-19, 08:41 PM
RE: [CA11] Quantum 2 height - Chuck - Raymarine - Moderator - 02-07-19 05:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)