Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] upgrading E120
02-11-19, 06:56 PM (This post was last modified: 02-12-19 10:49 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] upgrading E120
Need help with upgrade from E120/DSM300/B744 to Axiom Pro 12. I will be keeping my S3G course computer and ST8002 autopilot head. My deadrise is about 12 degrees. Currently, I have 2x 2" round depth/temp transducers in addition to the B744. I cruise at 8 kts and troll at 2 kts. I want to use round transducers to minimize through hull modification. B175 will be easier to install than B260 or RV212 transducers.

1) Will B175 work well for my application?

1) I want to use 2 Axiom Pro 12 with low and high freq 1KW Chirp B175 transducers. Which Axiom model is more suitable? Axiom PRO 12S or Axiom Pro 12RVX? Is it better to connect one transducer to each axiom unit or using a connector for the two transducers? What other cables and/or adaptors are required? Run from transducer to MFD is about 20'.

2) Can I connect the S3G and ST8002 using the Seatalk1 to SeatalkNG adapter kit?

Thank you.
Charles.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] upgrading E120 - charlestai - 02-11-19 06:56 PM
RE: [CA11] upgrading E120 - charlestai - 02-12-19, 02:45 PM
RE: [CA11] upgrading E120 - charlestai - 02-12-19, 03:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us