Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] upgrading E120
02-12-19, 01:43 PM
Post: #2
RE: [CA11] upgrading E120
Welcome to the Raymarine Forum Charles,

Please click here to view a FAQ addressing this subject.

Q1) Will B175 work well for my application?
A1. Yes. Can I assume that you are seeking to replace the B744V and separate 2" thru-hull transducer?

Q2) I want to use 2 Axiom Pro 12 with low and high freq 1KW Chirp B175 transducers. Which Axiom model is more suitable? Axiom PRO 12S or Axiom Pro 12RVX? Is it better to connect one transducer to each axiom unit or using a connector for the two transducers? What other cables and/or adaptors are required? Run from transducer to MFD is about 20'.
A2) For maximum high power CHIRP sonar performance with the B175 transducer pair, it would be recommended that a pair of Axiom Pro S MFDs along with an CP570 CHIRP Sounder Module. The MFDs and CP570 may be daisy chained together via appropriate lengths of RayNet (F) to RayNet (F) Cable. Alternatively, the MFDs and CP570 may each be interfaced to a HS5 RayNet Network Switch via appropriate lengths of RayNet (F) to RayNet (F) Cable.

Q3) Can I connect the S3G and ST8002 using the Seatalk1 to SeatalkNG adapter kit?
A3) Yes. Please see the "SeaTalk" section of the FAQ listed above.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] upgrading E120 - charlestai - 02-11-19, 06:56 PM
RE: [CA11] upgrading E120 - Chuck - Raymarine - Moderator - 02-12-19 01:43 PM
RE: [CA11] upgrading E120 - charlestai - 02-12-19, 02:45 PM
RE: [CA11] upgrading E120 - charlestai - 02-12-19, 03:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)