Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] upgrading E120
02-12-19, 02:45 PM (This post was last modified: 02-12-19 03:04 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] upgrading E120
Much appreciated. I will change my order to Axiom PRO S and the CP570.

I am replacing the 2" thru hulls with 3.75" for the B175s. I will re-drill over the 2" thru hulls to avoid creating new holes. I will leave the B744V as is. I don't want to disturb the hull more than necessary. Because of stringers, there isn't enough space for transducers with fairing (B265). Because my max speed is only 15 knots, I assume transducers with fairing block will be acceptable.? Can you confirm before I order my transducers? Thank you.

Charles.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] upgrading E120 - charlestai - 02-11-19, 06:56 PM
RE: [CA11] upgrading E120 - charlestai - 02-12-19 02:45 PM
RE: [CA11] upgrading E120 - charlestai - 02-12-19, 03:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)