Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] socket for Ray240E handset
02-20-19, 04:00 AM (This post was last modified: 02-20-19 04:34 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] socket for Ray240E handset
Hello, where can I find - as a single spare part - the socket on my dashboard, where the cable from the Ray240E handset is plugged in?
I have attached a photo of the socket. The contact pins are baggy and make loose connections with the handset plug.
The socket is factory fitted at the end of the cable from the loudspeaker, which is then connected to the VHF controller.
I don't want to replace the whole cable and loudspeaker, because it is installed through the structure of the boat, difficult to access.
My plan would be to cut off the socket from the cable, and solder a new socket onto the cable. Therefore I would need a new socket as a spare part.
Can I purchase one from Raymarine? Is there a part number?
Or can somebody give me a clue about the brand and type of this socket/plug connection, so that I can check the electronic industry supplies?
With kind regards
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[DG11] socket for Ray240E handset - drcbusch - 02-20-19 04:00 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us