The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] Axiom Pro mods show own boat as target

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Axiom Pro mods show own boat as target
03-02-19, 05:19 PM (This post was last modified: 03-04-19 11:27 AM by Derek - Raymarine - Moderator.)
Post: #1
Derekbreth Offline
Junior Member
**
 		Posts: 9
Joined: Dec 2018
Reputation: 0
[DG11] Axiom Pro mods show own boat as target
We have two Axiom Pro MFDs and since applying a recent software update we now see our own boat as an AIS target which never happened previously. Our AIS transponder is a Vesper Marine 8000 and we have made no changes to that recently. The transponder is connected over the nmea2000 network.

Please advise as to how to stop it showing as sometimes it even alarms as a dangerous target which is very irritating.

Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Axiom Pro mods show own boat as target - Derekbreth - 03-02-19 05:19 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication