The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Installing Navionics Platinum+ to G-Series MFD
03-08-19, 01:56 PM (This post was last modified: 03-08-19 02:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Installing Navionics Platinum+ to G-Series MFD
We have 2009 vintage dual G-series MFDs that came loaded with Navionics Platinum onto the hard drives. There were no cards for either unit and it has not been updated since new. I recently updated the firmware to the latest version in both MFD's with no issues. I have ordered separate Navionics Platinum+ for Vancouver B.C. & California/Oregon on CF cards.

Are there anything special we need to do to install this map software into both units? Cheers, Kevin
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Installing Navionics Platinum+ to G-Series MFD - polingk - 03-08-19 01:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)