The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] eS series to Axiom Connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] eS series to Axiom Connection
03-11-19, 01:24 PM (This post was last modified: 03-12-19 08:12 AM by Chuck - Raymarine - Moderator.)
Post: #1
MSjack Offline
Junior Member
**
 		Posts: 35
Joined: Mar 2018
Reputation: 0
[CA11] eS series to Axiom Connection
I currently have an eS127 running LH3 with the latest updates - Currently connected to my eS unit are the following - EV-1 Heading Sensor, RMK-9 and I'm using the NMEA output to my VHF. I just ordered a Quantum radar that I plan on connecting via WiFI to my eS127. (Should be here Thursday)

Couple of Questions please -

I intend to eventually order an Axiom with RV (either 7 or 9) and plan to hook it to my eS127 via my remaining available network port (one port is currently being used by the RMK-9), if I set the Axiom to master will it impact the eS127 NMEA outputs or any other any other devices I have connected to the eS unit?

Also, once installed should I connect the Quantum via Wifi to the Axiom or leave it connected to the eS127?

Thanks
Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] eS series to Axiom Connection - MSjack - 03-11-19 01:24 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication