Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Dst800 connect to ST60 tridata
03-21-19, 03:13 PM (This post was last modified: 03-21-19 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Dst800 connect to ST60 tridata
cpt_757,

Thanks for supplying the requested photos which positively identify the transducer as an A22154 DST800 analog instrument transducer. To interface this transducer to a ST60 Tridata instrument or iTC-5 Analog Instrument Converter, the transducer's color coded leads will be mated to the matching color coded terminals of the ST60 Tridata or iTC-5. As the DST800 features only one bare lead, it should be connected to the corresponding Speed transducer terminal ... no lead will be connected to the Depth bare lead terminal of the ST60 Tridata instrument. The leads of analog instrument transducers feature 1/8" female blade connectors to permit the leads to be mated to the male blade connector terminals of the instrument or iTC-5.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Dst800 connect to ST60 tridata - Chuck - Raymarine - Moderator - 03-21-19 03:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)