Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] RV-100 Mounting "out of water"
03-15-19, 10:22 AM (This post was last modified: 03-15-19 02:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RV-100 Mounting "out of water"
I currently have a thru-hull transducer used for high speed depth recording and wanted to know if the RV-100 transducer being mounted "slightly high" to prevent spray when running would impact the life or function of the RV-100?

I understand I will not get accurate if any readings at speed from the RV-100 but when I slow to a fast idle (off plane) I think it should work as intended.

Please let me know.

Thanks
Jack

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RV-100 Mounting "out of water" - MSjack - 03-15-19 10:22 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us