Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] e120w day/night display brightness issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e120w day/night display brightness issue
04-02-19, 09:42 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e120w day/night display brightness issue
Welcome to the Raymarine Forum rreimann,

Unfortunately, the E-Series Widescreen MFDs do not support automatically adjusting backlight settings based upon local time and/or light conditions. Should this condition occur, pressing and releasing the POWER button followed by pressing the function key located next to the right most function key will cause the MFD to switch between day and night color palettes. Rotating the rotary control of the UniController clockwise will then increase the MFD's backlight level.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] e120w day/night display brightness issue - Chuck - Raymarine - Moderator - 04-02-19 09:42 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication