[DG] [DG11] Tacktick Hull Transmitter

[Derek - Raymarine - Moderator]

Hi Sailingjeff

It is possible that the new transducer is taking a little more current than the original transducer was, so connect the red wire from the triducer to the 12v power connection of the hull transmitter box, does this enable operation?

Also replace the batteries in the hull transmitter too, even if 12v is connected, if the batteries are not holding a charge, then this will inhibit operation.

If both options fail, return the hull transmitter for further investigation is the service workshop.

Regards
Derek