[CA] [CA11] ES98 to Ray70 VHF (AIS)
|
04-09-19, 11:37 AM
(This post was last modified: 04-09-19 11:48 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] ES98 to Ray70 VHF (AIS)
Welcome to the Raymarine Forum Sam,
Q1. Is there anything in particular I need to do in settings to get AIS work now that the Ray70 is connect via seatalkng? A1. With regard to the Ray70, one need simply configure its AIS feature to ON Menu->Set-up->AIS. Selecting AIS will switch the internal AIS receiver On and Off. Additionally, the Ray70 must be configured for SeaTalkng/NMEA 2000 communications: Menu->Set-up->Network output->NMEA 2000 Within the Chart application, the AIS layer (MENU->PRESENTATION->OVERLAYS->AIS) must also be configured to ON within each Chart application page/pane in which you desire to view AIS data. Should the problem persist, then please attach the Diagnostics...html file from the system's Data Master MFD to your next response to this thread. Q2. Also do I to need to turn off internal GPS on my MFD while the RS150 is connected? Or do they work in conjunction? A2. When the system feature more than one source of GPS data the Data Sources feature (HOME->SET-UP->SYSTEM SETTINGS->DATA SOURCES) of an i70, p70/p70S/p70R/p70RS or MFD running LHII or LH3 software should be used to select which GPS source will be used for GPS, Date & Time, and Datum data. In this case, the RS150 would typically be selected. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] ES98 to Ray70 VHF (AIS) - Samuelgage - 04-06-19, 07:40 PM
RE: [CA11] ES98 to Ray70 VHF (AIS) - Chuck - Raymarine - Moderator - 04-09-19 11:37 AM
|
User(s) browsing this thread: 1 Guest(s)