Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] RV-100 Mounting Height
04-11-19, 07:32 AM (This post was last modified: 04-17-19 10:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] RV-100 Mounting Height
This illustration in the RV-100 users guide shows three different levels for the RV-100 in relationship to the water flow from the bottom edge of the hull. Is this a good, better, best illustration? I ask because I have mine currently mounted close to example on the left for fear of impacting floating debris. Granted I have not tested the unit yet but if my readings are acceptable I plan to keep it at that height.

[Image: attachment.php?aid=2865]


Attached File(s) Thumbnail(s)
   

Jack - MS Gulf Coast
Current Ray Equipment - Axiom 7 RV serving as DM and networked to a eS127 -
Quantum Radar via WiFi to eS127, RMK-9 networked to eS127, EV-1 Sensor Core, RV-100 and B60 transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] RV-100 Mounting Height - MSjack - 04-11-19 07:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us