Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] tracking route created by auto-route
04-12-19, 12:07 PM (This post was last modified: 04-12-19 02:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] tracking route created by auto-route

I don't have the exact model of the auto-pilot my boat at the moment, but it is original equipment on a 2005 Searay Sundancer. It was originally connected to a C-series display and currently to an E-series display. I'm considering upgrading to an Axiom MFD which has the auto-routing feature. Can you tell me if my auto-pilot will be able to track a route created by auto-route in the same way that it would be able to track any other route. I only ask because a third party marine electronics manufacturer explicitly states that their auto-guidance routes are not compatible with third party autopilots. This is one of the reasons that I'm leaning towards remaining with a Raymarine MFD, but before making that decision I want to confirm that the Axiom auto-routes will be fully compatible (be able to be tracked) by the existing Raymarine autopilot.

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] tracking route created by auto-route - taitelh - 04-12-19 12:07 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us