Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Adding one more autopilot (ACU200) and upgrading my network to STNG
05-13-19, 02:55 AM
Post: #4
RE: [LW11] Adding one more autopilot (ACU200) and upgrading my network to STNG
Dear jonasE,

Thank you for your query.

Q1) Power STng network through the ACU200
A1) You can power the STng network from the ACU200

Q2)If I extend the STng network to the four displays and use an STng-ST1 converter I would not like to add power just for the three ST60 displays.
A2) The maximum recommended ST1 instruments to be powered from the STng backbone is 4 - your 3 ST60 instruments will be ok.

Q3) At the Nav station, there will only be three devices on the ST1 network connected with the second STng-ST1 converter (MiniPlex, S100 and the old GPS RN300). Could the S100 and the MiniPlex not get power coming from the STng network?
A3) I would advise to power the S100 and the Miniplex independently from the STng network.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] Adding one more autopilot (ACU200) and upgrading my network to STNG - Louise - Raymarine - Moderator - 05-13-19 02:55 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)