[LW] [LW11] Converting issues changing from C120 to AxiomPro 9

[Louise - Raymarine - Moderator]

Dear ALK10,

Can you confirm you are seeing yourself on Marine Traffic or something similar?

Can you also confirm you are on Lighthouse V3.9.46?
Your AIS is connected via NMEA hi and not low?

On the Axiom Pro can you confirm the following Home>settings>network>NMEA setup> Port 2 - 38400 baud rate
Is the GGA NMEA sentence switched on?

Home>chart>menu>targets>AIS settings> show AIS targets on chart - is this switched on? Is silent mode switched off?

Home>chart>menu>targets>AIS - is there a list of AIS targets?

Home>chart>menu>settings>layers - is AIS layer available here? Do switch on if it is.

If none of this proves to be successful, you do need to get a dealer to look at the installation or thoroughly check your AIS unit.

Many Thanks
Louise