Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] Itc-5 not working
05-01-19, 06:42 AM (This post was last modified: 05-01-19 09:09 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [LW11] Itc-5 not working
Hi louise, i managed to up date all of the products.
The wind transducer cable is split at the bottom of the mast to allow the mast to be removed
I tested the wind transducer, i get the following readings. Red 7.94 green 0.164 yellow 0.5/1.5 blue 4.16
Can you tell me what these readings indicate
These readings were taken at a time when there was very little wind

Can you tell me how i can test the itc-5

Can you tell me where there is a raymarine test centre near me

Cheers

Rob
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Itc-5 not working - spycatcher - 04-26-19, 09:37 AM
RE: [LW11] Itc-5 not working - spycatcher - 05-01-19 06:42 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us