The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] i70 ETA timer fault
04-30-19, 11:58 PM (This post was last modified: 05-01-19 09:36 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] i70 ETA timer fault
The ETA timer should go from 23:59 hrs to 00:00 hrs, however, it goes to 24:00, 24:01 ........24:59 then to 00:00. I first noticed this fault on overnight passages when the arrival time would always be about 1 hour earlier than my estimates based on distance and average speed. It took a long time to actually capture the fault condition, but eventually I was able to set up the conditions and witness the ETA timer behavior. However, that was only the first part of the problem. The second part was to see when the timer caught up with this extra hour. Finally I captured it and the catch up occurs at 9:59hrs which progresses to 11:00hrs.
I have attached photo captures of the 23:xx - 24:xx fault
Has anyone else reported this problem?


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] i70 ETA timer fault - Chris.au - 04-30-19 11:58 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)