[TG11] Axiom MFD wind direction 60 degrees off

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Axiom MFD wind direction 60 degrees off

05-12-19, 06:26 PM

Post: #5

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Axiom MFD wind direction 60 degrees off

Hello Mike,

I've documented the process a little more at this FAQ. There's a video that should make things clearer.

If you've done the pointer calibration you'll next need to do the wind angle alignment again. If you've done so and the two are still reading differently then perhaps you could show me what's happening with some photos or a video?

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Axiom MFD wind direction 60 degrees off - mcintoshusa1@gmail.com - 05-06-19, 08:00 AM

RE: [TG11] Axiom MFD wind direction 60 degrees off - Tom - Raymarine - Moderator - 05-10-19, 02:53 AM

RE: [TG11] Axiom MFD wind direction 60 degrees off - mcintoshusa1@gmail.com - 05-10-19, 07:57 AM

RE: [TG11] Axiom MFD wind direction 60 degrees off - mcintoshusa1@gmail.com - 05-12-19, 10:04 AM

RE: [TG11] Axiom MFD wind direction 60 degrees off - Tom - Raymarine - Moderator - 05-12-19 06:26 PM

User(s) browsing this thread: 1 Guest(s)