Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I am having difficulty with new download of Lighthouse 3.9.
05-08-19, 03:18 PM (This post was last modified: 05-08-19 03:19 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] I am having difficulty with new download of Lighthouse 3.9.
Welcome to the Raymarine Forum ZIEZO,

While I don't have instructions which are tailored for an Apple computer, the process is essentially the same as that for PC users.

It is recommended that the compressed software update folder containing LightHouse 3 for eS/gS-Series MFDs be downloaded from the eS/gS-Series MFD's Software Update web page to one's computer., Raymarine has specified that two microSD cards be used to perform the update. Alternatively, a single microSD memory card may be used. However, doing so will require that that the microSD memory card be first populated with only the raymarine_atom-3.9.46.upgrade.iso file from the downloaded compressed folder, that this file be erased, and that the microSD memory card then be populated with the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso from the downloaded compressed folder prior to installing the new LH3 base map cartography.

Software update procedure:
1) Insert a blank microSD memory card into your computer's memory card reader ... recommend using a microSD memory card which is not your system's chart card
2) Download the desired software update compressed folder from the LightHouse 3 for eS/gS-Series MFDs Software Update web page. The compressed folder containing the software update files will be downloaded from the product's software update web page and saved onto the computer used to download the software update zip file ... the downloaded file will typically be located within the Downloads folder of computers running the Windows operating system
3) Open the computer's Downloads folder (or your computer's folder where downloaded files are saved)
4) Right click on the downloaded compressed folder containing the software update files to display a menu of options
5) Left click on the EXTRACT ALL menu option to display the Extract Compressed (zipped) Folders dialog
6) Left click on the Browse button within the Extract Compressed (zipped) Folders dialog to display the Select a Destination dialog
7) Within the Select a Destination dialog, left click on the drive letter corresponding to your microSD memory card, and then click on the OK button.
8) Upon completion of the extraction, right click on the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file within the displayed File Explorer window and select CUT from the displayed menu
9) Close the File Explorer window
10) Position your mouse cursor on the Desktop, right click, and then select paste from the displayed menu
11) Eject the microSD memory card containing from the raymarine_atom-3.9.46.upgrade.iso file from PC's memory card reader
12) Insert the second microSD memory card into the MFD's memory card reader
13) right click on the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file on the computer's desktop and select CUT from the displayed menu
14) Run the Windows This PC feature (Search->This PC)
15) Within the scrolling list within the left side of the displayed File Explorer (This PC) window, left click on the drive letter corresponding to your microSD memory card. Doing so will display the contents of the microSD memory card on the right hand side of the File Explorer.
This PC feature
16) Right click within the blank white area of the right side of the this PC feature and select paste from the pop-up menu. Doing so will paste the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file into the root level directory of the second microSD memory card.
17) Close the File Explorer window
18) Eject the second microSD memory card from the PC's memory card reader.

For eS/gS-Series MFD's currently running LightHouse II v19.03 software:
1) Power the system's MFDs ON, permit them all to complete startup initialization, and then acknowledge the Limitations of Use notice.
2) Insert the microSD memory card containing the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file into the Data Master MFD's memory card reader
3) If the MFD does not automatically detect that software updates are available then command the Data Master MFD to Update Software (HOME->SET-UP->MAINTENANCE->CHECK CARD FOR UPDATES)
4) When provided a list of products for which software updates are available, select to update the software within the eS/gS-Series MFDs and then select the INSTALL NOW option. The Data Master MFD will push the software update out to the system's other eS/gS-Series MFDs.
5) Upon completion of the software update(s), cancel/back out of any open dialogs, and return to the Home screen
6) Eject the microSD memory card containing the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file (HOME->MY DATA->EJECT CARD) from the Data Master MFD's memory card reader and replace it with the microSD memory card containing the raymarine_atom-3.9.46.upgrade.iso file.
7) If the MFD does not automatically detect that software updates are available then command the Data Master MFD to Update Software (HOME->SET-UP->MAINTENANCE->CHECK CARD FOR UPDATES)
8) When provided a list of products for which software updates are available, select to update the software within the eS/gS-Series MFD(s) and then select the INSTALL NOW option. The Data Master MFD will push the software update out to the system's other eS/gS-Series MFDs.
9) Upon completion of the software update(s), cancel/back out of any open dialogs, and return to the Home screen
10) Eject the microSD memory card containing the raymarine_atom-3.9.46.upgrade.iso file from the Data Master MFD's memory card reader (HOME->MY DATA->EJECT SD CARD).
11) Optional, but recommended, command a Factory Reset via the Data Master MFD (HOME->SET-UP->THIS DISPLAY->FACTORY RESET)

For eS/gS-Series MFD's currently running LightHouse 3 v3.3.170 or later software:
NOTE: the cartography update included within the LightHouse 3 v3.8.105 software update for eS/gS-Series MFDs is identical to that included within the LightHouse 3 v3.9.46 software update for eS/gS-Series MFDs. Accordingly, should one be updating from LightHouse 3 v3.8.105, then the cartography update (steps 1-6) may be skipped.

1) Power the system's MFDs ON, permit them all to complete startup initialization, and then acknowledge the Limitations of Use notice.
2) Insert the microSD memory card containing the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file into the Data Master MFD's memory card reader
3) If the MFD does not automatically detect that software updates are available then command the Data Master MFD to Update Software (HOME->SET-UP->GETTING STARTED->UPDATE SOFTWARE->CHECK SD CARD)
4) When provided a list of products for which software updates are available, select to update the software within the eS/gS-Series MFDs and then select the INSTALL NOW option. The Data Master MFD will push the software update out to the system's other eS/gS-Series MFDs.
5) Upon completion of the software update(s), cancel/back out of any open dialogs, and return to the Home screen
6) Eject the microSD memory card containing the ray_mfd_AtomCartographyRX5v1_22.upgrade.iso file (HOME->MY DATA->IMPORT/EXPORT->EJECT SD CARD) from the Data Master MFD's memory card reader and replace it with the microSD memory card containing the raymarine_atom-3.9.46.upgrade.iso file.
7) If the MFD does not automatically detect that software updates are available then command the Data Master MFD to Update Software (HOME->SET-UP->GETTING STARTED->UPDATE SOFTWARE->CHECK SD CARD)
8) When provided a list of products for which software updates are available, select to update the software within the eS/gS-Series MFD(s) and then select the INSTALL NOW option. The Data Master MFD will push the software update out to the system's other eS/gS-Series MFDs.
9) Upon completion of the software update(s), cancel/back out of any open dialogs, and return to the Home screen
10) Eject the microSD memory card containing the raymarine_atom-3.9.46.upgrade.iso file from the Data Master MFD's memory card reader (HOME->MY DATA->EJECT SD CARD).
11) Optional, but recommended, command a Factory Reset via the Data Master MFD (HOME->SET-UP->THIS DISPLAY->FACTORY RESET)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] I am having difficulty with new download of Lighthouse 3.9. - Chuck - Raymarine - Moderator - 05-08-19 03:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)