Software version 17 for MFD

[Chuck - Raymarine - Moderator]

Randy,

It appears that you have indeed incorrectly interpreted the following:
"Automatic Chart Selection
Upon opening chart app instance the app will automatically check for cards in the card reader and open the appropriate chart. If multiple chart cards are installed, the app will open by priority of Lighthouse, then Navionics or CMAP."

In prior LightHouse software releases, the default Chart Selection configuration setting for each Chart application page/pane had been Navionics Nautical Charts. With the introduction of v17.45 software, should no chart selection has been previously configured and all three of the supported chart cards are present within the system, then the default chart shown within each Chart application page/pane will be Lighthouse. Should Navionics and C-Map chart cards be present within the system, then default chart shown within each Chart application page/pane will be Navionics Nautical Charts. Should only a C-Map chart card be present within the system, then default chart shown within each Chart application page/pane will be C-Map Navigational Chart.