[CA] [CA11] eS127 with LH3.9 not seeing DST800
|
05-08-19, 06:37 AM
(This post was last modified: 05-09-19 12:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] eS127 with LH3.9 not seeing DST800
Just upgraded my eS127 and eS97 with LH3.9. When I look at Data sources/Depth menu it does not show my DST800 as a data source (which is shown as the data source when I use my I70 displays. A consequence is that I don't have access to a sonar page, which would allow me to specify the position of the transducer relative to the waterline and select the basis of my depth indication (with reference to waterline, keel or transducer).
Is this functionality missing or is it an error - or am I missing something, doing something wrong? I can change the settings via the I70s in the cockpit but would expect to be able to do that using the eS127 (which is at the nav station) Thanks Colin |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] eS127 with LH3.9 not seeing DST800 - cwilson010 - 05-08-19 06:37 AM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - Chuck - Raymarine - Moderator - 05-09-19, 01:01 PM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - cwilson010 - 06-24-19, 10:04 AM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - Chuck - Raymarine - Moderator - 06-24-19, 10:46 AM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - Chuck - Raymarine - Moderator - 06-25-19, 12:13 PM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - cwilson010 - 06-27-19, 08:23 AM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - Chuck - Raymarine - Moderator - 06-27-19, 09:05 AM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - cwilson010 - 06-27-19, 09:11 AM
RE: [CA11] eS127 with LH3.9 not seeing DST800 - Chuck - Raymarine - Moderator - 06-27-19, 09:38 AM
|
User(s) browsing this thread: 2 Guest(s)