The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Estimated fuel level and distance to empty at zero
05-10-19, 05:09 PM (This post was last modified: 05-15-19 07:53 PM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Estimated fuel level and distance to empty at zero
My Estimated Fuel Remaining is reading and distance to empty read zero on the MFD. These worked correctly for about 11 hours.

I have a DF200 connected to a NMEA 2000 network. I also have a Raymarine es78 MFD connected to the network.

The MFD Fuel Economy continues to display functions normally.

After speaking with Raymarine (who was very helpful) I put the following list of questions together and sent them to Suzuki. Below are the questions with responses from Suzuki.that I have;

I'm using part numbers;
- 990C0-88149-350 (SMIS Engine Interface Cable)
- 990C0-88136 (Suzuki SMIS Adapter to SDS)

Q: Are either or both of these firmware update-able? (I believe the Interface Cable is) Is the latest firmware v3.5?
A: The interface is, but it is the latest. The other is just a cable, so no

Q: Are either of these a gateway?
A: No

Q: Is the data flow from the engine unidirectional?
A: No

Q: Is the Engine transmitting PNG 127497 ?
A: No, K Line

Not related to this issue, I also asked;
Q: Does the engine transmit engine temperature to the NMEA network?
A: No it needs a C10 in the system to be able to read temperature

Per Raymarine Support, I;
- Backed up my settings
- Backed up my routes and waypoints
- Did a factory reset
- Restored my settings, routes and waypoints
- I also know that I have about 70 gallons in an 88 gallon tank. In order to initialize the fuel management, I set the tank size to 70 gallons and set all tanks full. I then changed the size of the tank to 88 gallons.

I still have some follow up to do, but need to get down to the boat to do so. Will report back with more details.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Estimated fuel level and distance to empty at zero - JeepSWAG - 05-10-19 05:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)