The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-1 Calibration
05-13-19, 01:07 PM (This post was last modified: 05-14-19 08:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] EV-1 Calibration
Is it possible to validate the EV-1 Compass calibration using an Axiom panel? I do not have the full autopilot solution, I just purchased the EV-1 to feed heading data, while stopped, to the chart.

I've tried forcing the automatic calibration but running figure 9's at 5-10 MPH and I've even seen pop up messages on the Axiom indicating the deviation was configured. Yet the results seem inconsistent.

The compass appears to correct it's deviation during long runs but then when powering up the system the next time it can be off by 20+ degrees.

Thoughts?

Thanks in advance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] EV-1 Calibration - pinkish_panther - 05-13-19 01:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)