Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New Raymarine system & questions . . .
05-20-19, 01:21 PM (This post was last modified: 05-20-19 01:25 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA11] New Raymarine system & questions . . .
Martin35,

Q: I've looked at all of the manuals for my devices and there is no listing for the LEN value.
A: From the respective product installation guides:
ITC-5 3; Chapter 5.6 Technical specification - correct
i60 Wind Instrument 4; Chapter 13.1 Technical specification - correct
i50 Depth Instrument 4; Chapter 12.1 Technical specification - correct
i50 Speed Instrument 4; Chapter 12.1 Technical specification - correct
P319 Depth Transducer 1; N/A - analog sensor (i.e. not interfaced to SeaTalkng / NMEA 2000 backbone)
P120 Speed Transducer 1; N/A - analog sensor (i.e. not interfaced to SeaTalkng / NMEA 2000 backbone)
E22078 Short Arm Wind 1; N/A - analog sensor (i.e. not interfaced to SeaTalkng / NMEA 2000 backbone)
i70s Multifunction Display 3; Chapter 17.1 Technical specification - correct
P70s Auto Pilot Control Head 3; Chapter 15.1 Technical specification - correct
ACU-100 Evolution Autopilot 3; Chapter 9.2 Technical specification — ACU-100, ACU-150 - LEN = 1
Axion 7 MFD 1; Chapter 8.1 Axiom tech specs - correct
EV-1 Sensor Core 1; Chapter 9.1 Technical specification — EV-1 and EV-2 - correct
EV-100 Wheel Autopilot 1; N/A - drive unit (i.e. not interfaced to SeaTalkng / NMEA 2000 backbone)
Simrad RS-35 VHF 1

Assuming that the Simrad RS-35's LEN value is correct, the total LEN value: 25
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] New Raymarine system & questions . . . - Chuck - Raymarine - Moderator - 05-20-19 01:21 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)