Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] PGN 130311
05-22-19, 10:59 AM (This post was last modified: 05-22-19 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] PGN 130311
mannery,

Q1. Does this refer to water temperature as derived from the thermistor‎ on say an RV-100 transducer.
A2. Yes. This would also be populated by PGN 130310 ... the PGN featuring water temperature and this same PGN would be used to populate the Water temp data overlay / Dashboard data item / Sidebar data item.

Q2. or is this information populated from the temperature data item contained within PGN130311.
A1. Negative. See the response to Q1.

Q3. or perhaps it can be configured for either?
A3. Not supported. The MFD will prioritize water temperature data. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] PGN 130311 - mannery - 05-20-19, 03:50 PM
RE: [CA11] PGN 130311 - mannery - 05-22-19, 10:23 AM
RE: [CA11] PGN 130311 - Chuck - Raymarine - Moderator - 05-22-19 10:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)