The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [TG] E80 plotter with AIS 700

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] E80 plotter with AIS 700
05-25-19, 01:02 PM (This post was last modified: 05-29-19 01:58 AM by Tom - Raymarine - Moderator.)
Post: #1
nachothecat Offline
Junior Member
**
 		Posts: 5
Joined: Sep 2018
Reputation: 0
E80 plotter with AIS 700
Hello,

I have two questions.

1. What is the typical range to see AIS with the antenna on a 17meter mast? I understand you might be able to see class A AIS a bit further as they use 12.5 watts. With class B using 2. Im currently only seeing targets 3nm away or less. My VSRW is 1
6. I have changed the antenna but still seems to be 3nm.

2. When connecting the AIS 700 to a E80 in order to enable slient mode is there a way to connect the wires to the chart plotter to do this or do you need to use an external swtich?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E80 plotter with AIS 700 - nachothecat - 05-25-19 01:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication