Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] building updated system for axiom 12 leaving the existing seatalk instrument

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] building updated system for axiom 12 leaving the existing seatalk instrument
06-11-19, 10:20 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] building updated system for axiom 12 leaving the existing seatalk instrument
Robo,

The Type 100/300 autopilot course computers are likewise not supported (have not been tested) for use with the SeaTalk to SeaTalk Converter. The solution for interfacing the Type 100/300 autopilot course computers to an Axiom 12 MFD would be the same as those which had been previously specified for the ST4000 autopilot within this thread. More specifically, You may either connect the NMEA 0183 output leads of the Actisense NGW-1-ISO-STNG to the NMEA 0183 input terminals of the autopilot control head or those of the Type 100/300 autopilot course computer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] building updated system for axiom 12 leaving the existing seatalk instrument - Chuck - Raymarine - Moderator - 06-11-19 10:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication